Bracket : J2 Bracket

Armrest : F-19a Aluminum Armrest

Stack : 60 mm. -120 mm.

Reach : Max Aft -180 mm. Max Fore 70 mm.

Extension Adjustment : 125 mm. – 275 mm. (c of basebar-end)

Width : 145 mm. – 300 mm. (center to center)

Center Clamp Diameter : Fits 26.0 mm. and 31.8mm. bars

Color : Anodized Matte Black

Weight : 500g.

รูปร่าง : ส่วนโค้งง้อ 13°

J2 Bracket : แผ่นรองแขนที่แยกจากโครง สามารถปรับได้หลายระดับ เพื่อให้พอดีกับแขนของคุณเอง

F-19a Aluminum Armrest : ปรับได้ 4 ระบบ พร้อมกับปรับองศาได้ 15°

Tech Specs

Bracket : Sonic

Clamp Diameter : 31.8 mm. or (26.0 with Shim Kit – Shim Kit is sold separately)

Armrest :  Ergo / 10 mm. Pads

Armrest Width : 124 mm. to 290 mm. in 18.5 mm. steps (with Extensions at 100mm)

Armrest Offset : -70 mm. to -17.5 mm. in 7.5 mm. steps

Armrest Stack : The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130 mm. stack with (70 mm. of spacers added)

Construction : 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing

Extension Length : 400 mm.

Extension Angle : 39 Degrees

Extension Rise : 87 mm. (bottom to top)

Extension Offset : 15 mm. total

Outer Diameter : 22.2 mm.

Inner Diameter : 19.2 mm.

Shifter Compatibility : Electronic or Mechanical

Color : Anodized Matte Black

Weight : 564 g.

Tech Guide

Torque settings (all bolts are M6)

Bar Clamp : 6Nm (53 inlbf)

Extension Clamp : 6Nm (53 inlbf)

Armrest Bolts : 4.7Nm (42 inlbf)

Weight

Bracket : 234 g.

Armrest : 130 g.

Extensions : 222 g. / pair

Total : 586 g.

Sonic Ergo 52A Aerobar

Tech Specs

Bracket : Sonic

Clamp Diameter : 31.8 mm. or (26.0 with Shim Kit – Shim Kit is sold separately)

Armrest :  Ergo / 10 mm. Pads

Armrest Width : 124 mm. to 290 mm. in 18.5mm steps (with Extensions at 100 mm.)

Armrest Offset : -70 mm. to -17.5 mm. in 7.5 mm. steps

Armrest Stack : The minimum is 60 mm. and the bracket is compatible with our existing risers which add up to 130 mm. stack with (70 mm. of spacers added)

Construction : 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing

Extension Length : 400 mm.

Extension Angle : 52 Degrees

Extension Rise : 87 mm. (bottom to top)

Extension Offset : 15 mm. total

Outer Diameter : 22.2 mm.

Inner Diameter : 19.2 mm.

Shifter Compatibility : Electronic or Mechanical

Color : Anodized Matte Black

Weight : 564 g.

Tech Guide

Torque settings (all bolts are M6)

Bar Clamp : 6Nm (53 inlbf)

Extension Clamp : 6Nm (53 inlbf)

Armrest Bolts : 4.7Nm (42 inlbf)

Weight

Bracket : 234 g.

Armrest : 130 g.

Extensions : 222 g.

Total : 586 g.

Weight : 270 g. (42 cm.)

Width : 40, 42, 44 cm. (center to center)

Center Clamp Diameter : 31.8 mm.

Clamp Width : 100, 120, 140 mm.

Clip Compatible : Yes

Material :  6061-T6 AL

Finish : Matte Black

Pursuit Reach : 165 mm. (center to tip)

Pursuit Drop : 0

Pursuit OD/ID : 24 / 20.5 mm.

Construction : 3:1 Compliant Wing Section with zero drop (UCI Legal)

Drop Outsweep : No

The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests.

Fit Data

– The WING/10a is available in the following widths : 36, 38, 40, 42, 44

– The straight hand grips are part of the flippable design that allows the grip height to be modified by 10 mm.

The grip length can also be trimmed by up to 30 mm.

– The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences.

– An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops

Accessories

The WING/10a can be used with any Profile Design clip-on aerobar, brake lever and stem option.

Tech Specs

Weight : 265 g. (38 cm.)

Width : 36, 38, 40, 42, 44 cm. (center to center)

Center Clamp Diameter : 31.8 mm.

Clamp Width : 100 mm. (on all bar sizes)

Clip Compatible : Yes

Material :  6061-T6 AL

Finish : Matte Black

Pursuit Reach : 160 mm. (center to tip)

Grip Offset : ± 5 mm.

Pursuit OD/ID : 23.7 / 20.3 mm.

Drop Outsweep : No

Tech Guide

– Maximum cut distance on grip : 30 mm.

– Grip Stack High position : 15.9 mm.

– Grip Stack low position : 5.9 mm.

– Only compatible with internally routed brake levers

– Di2 Compatible

– UCI 3:1 compliant

The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions.

The new brackets add the ability to tilt the entire assembly, as well as letting the armrests go much narrower than the first generation design.

A 35-degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range.

The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options.

The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut.

The bracket can be tilted by up to 10 degrees.

There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further.

All hardware and component pieces were not only designed for performance and ease of use but also strength.

Baseball Width : 42cm. (Center-to-Center)

Baseball : Carbon

Pursuit Reach : 157.5 mm. (centre to tip)

Bracket : Aeria Evo (6061-T6 aluminium)

Armrest : Ergo

Armrest Stack : 56 mm. to 80 mm. (5 mm. Increments)

Armrest Offset : -66 mm. to 1.5 mm. (7.5 mm. Increments)

Armrest Width : 100 mm. to 266 mm. (18.5 mm. Increments)

Extension Length Adjustment : 40 mm.

Extension Length : 340 mm.

Extension Height : 80 mm.

Extension Angle : 35°

Extension Material : 6061-T6 aluminium, pre-drilled for the bar-end shifter cable

Armrest Rotation : 7°

Bracket Tilt Adjustment : 0-10°

Colour : Matte Black

Weight : 809g.

IntegratedBrackets : Aeria is lightweight, simple and easy to adjust.The Aeria’s patented bracket system simultaneously clamps

the extensions while attaching the brackets to the wing. This design yields a smaller profile in the wind, creates less drag,

and minimizes corrosion issues from exposed bolts.

Wing : UCI Compliant 3:1, aerodynamic full carbon fiber wing has zero drop from clamp to brake extensions.

Combined with a shorter reach, this design translates to better control.

Stackable Risers : Slim, sleek risers fine-tune armrest/extension height to get a perfect blend of aerodynamics, power and comfort.

Ergo Armrest : Offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control.

The bolt pattern yields 48 possible configurations just by moving the armrest.

T4+ Carbon Extensions : The high-performance shallow ski-bend T4+ Carbon extension offers a single neutral wrist angle

with a low extension height for better aerodynamics.

Engineering

UD Carbon wing combines with the most dynamic integrated bracket system on the market that uses only 4 bolts

to simultaneously affix bracket and extension.

Fit : The patent pending bracket system is stackable up to 135mm in 5mm increments. Armrests are width and fore/aft adjustable.

A zero drop basebar with short reach provides more stable climbing and cornering position. Combined with a shorter reach,

this design translates to better control.

Aerodynamic Wing : UCI compliant hydroformed wing combined with the hidden bolts and aero risers creates an ultra low

drag system while minimizing corrosion issues from exposed bolts. Wind tunnel analysis proves that achieving stack

with the Aeria risers creates less drag than using steerer tube spacers.

Basebar Width : 42 cm. (Center-to-Center)

Armrest : Ergo Armrest

Stack : 55 mm. – 135 mm. (highest stack available of any Profile Design model)

Reach : -60 mm. / -40 mm. / -30 mm. or -10 mm. with the bracket flipped

Extension Adjustment : 150 mm. – 305 mm. (T4+ Carbon extensions)

Extension Drop : 0 mm.

Center Clamp Diameter : 31.8 mm.

Armrest Width : 155 mm. – 203 mm.

Color : Gloss Carbon Black or Matte Black

Weight : 663 g.

Bracket : J2 Bracket

Armrest : F-19a Aluminum Armrest

Stack : 60 mm. – 120 mm.

Reach : Max Aft -180 mm. Max Fore 70 mm.

Extension Adjustment : 125 mm. – 275 mm. (c of basebar-end)

Width : 145 mm. – 300 mm. (center to center)

Center Clamp Diameter : Fits 26.0 mm. and 31.8 mm. bars

Color : Anodized Matte Black

Weight : 500g.

รูปร่าง : ส่วนโค้งง้อ 13°

J2 Bracket : แผ่นรองแขนที่แยกจากโครง สามารถปรับได้หลายระดับ เพื่อให้พอดีกับแขนของคุณเอง

F-19a Aluminum Armrest : ปรับได้ 4 ระบบ พร้อมกับปรับองศาได้ 15°

Material : 6061-T6 Aluminum

Colour : Matt Black

Weight : 122 g. pair

K-03

ขนาด 145 mm.

น้ำหนัก 190 g.

(รางคาร์บอน)

K-06

ขนาด 142 mm.

น้ำหนัก 190 g.

(รางคาร์บอน)

K-16

ขนาด 145 mm.

น้ำหนัก 184 g.

(รางคาร์บอน)

ราคา 3,290 บาท

จากราคา 4,500 บาท

K-03

ขนาด 145 mm.

น้ำหนัก 190 g.

(รางคาร์บอน)

K-06

ขนาด 142 mm.

น้ำหนัก 190 g.

(รางคาร์บอน)

K-16

ขนาด 145 mm.

น้ำหนัก 184 g.

(รางคาร์บอน)

ราคา 3,290 บาท

จากราคา 4,500 บาท